Populate the side area with widgets, images, navigation links and whatever else comes to your mind.
18 Northumberland Avenue, London, UK
(+44) 871.075.0336
ouroffice@vangard.com
HYDRAULIC WATER AND TRASH PUMPS
All Joint Zone pumps are made with the highest-quality materials. The submersible centrifugal design requires no priming and can run dry all day without damage. Direct drive requires no maintenance as all moving parts are self-lubricated with passing hydraulic fluid.
A semi closed designed stainless steel impeller will not corrode and will draw water down to a depth of only 1 inch. The 20SP is fitted with flush face couplers that thread directly into SAE ports, No NPT hydraulic joints to weep. The 20SP Water Pump comes with a 2” female NPT output port fitted with a 2” Cam Loc fitting standard.
Purchase this tool from one of our authorized dealers:
| Max Pumping Capacity | 250 gpm |
| Max GPH | 15000 |
| Max TDH | 140 ft |
| Pump Type | Water |
| Volute Material | Aluminum |
| Impeller Material | Steel |
| Discharge | 2″ Cam Loc |
| Weight | 12 lbs |
| LxWxH | 9.5″ x 8″ x 9″ |
| Hydraulic Flow | 4-9 gpm |
| Max Pressure | 2000 psi |
A semi-closed designed stainless-steel impeller will not corrode and will draw down water to a depth of only 3 inches. The 30SP is fitted with flush face couplers that thread directly into SAE ports, No NPT hydraulic joints to weep. The 30SP Water Pump comes with a 3” female NPT output port fitted with a 3” Cam Loc fitting standard.
Purchase this tool from one of our authorized dealers:
| Max Pumping Capacity | 500 gpm |
| Max GPH | 30000 |
| Max TDH | 105 ft |
| Pump Type | Water |
| Volute Material | Aluminum |
| Impeller Material | Steel |
| Discharge | 3″ Cam Loc |
| Weight | 21 lbs |
| LxWxH | 12″ x 10″ x 12″ |
| Hydraulic Flow | 7-11 gpm |
| Max Pressure | 2000 psi |
Trash Pumps
A urethane bowl and impeller are very durable and capable of moving liquids containing up to 30% solids. If you are pumping oily sludge, septic systems, muddy trenches or even clean water, this a pump for you. The 30TP is fitted with flush face couplers that thread directly into SAE ports, No NPT hydraulic joints to weep. The 30TP Trash Pump comes with a 3” female NPT output port fitted to a 3” Cam Loc fitting standard.
Purchase this tool from one of our authorized dealers:
| Max Pumping Capacity | 475 gpm |
| Max GPH | 28500 |
| Max TDH | 98 ft |
| Pump Type | Trash/Sludge/Slurry/Water |
| Max Solids | 3″ |
| Volute Material | Urethane |
| Impeller Material | Urethane |
| Discharge | 3″ Cam Loc |
| Weight | 30 lbs |
| LxWxH | 14″ x 12″ x 13″ |
| Hydraulic Flow | 7-11 gpm |
| Max Pressure | 2000 psi |
A durable steel bowl and ductile iron impeller are very durable and capable of moving liquids containing up to 30% solids. If you are pumping oily sludge, septic systems, muddy trenches or even clean water this a pump for you. The 40TP is fitted with flush face couplers that thread directly into SAE ports, No NPT hydraulic joints to weep. The 40TP Trash Pump comes with a 4” male NPT output port fitted to a 4” Cam Loc fitting standard.
Purchase this tool from one of our authorized dealers:
| Max Pumping Capacity | 875 gpm |
| Max GPH | 52500 |
| Max TDH | 45 ft |
| Pump Type | Trash/Sludge/Slurry/Water |
| Max Solids | 4″ |
| Volute Material | Steel |
| Impeller Material | Iron |
| Discharge | 4″ Cam Loc |
| Weight | 59 lbs |
| LxWxH | 19″ x 15″ x 19″ |
| Hydraulic Flow | 7-11 gpm |
| Max Pressure | 2000 psi |
Great for dredge operations. The 40TPS has a 316 Stainless Steel Volute and Impeller as well as an anodized motor mount and wear Plate. This compact submersible trash pump is a light weight, efficient way to move large volumes of liquids that can contain sand, dirt, gravel and can handle the removal of water containing solids up to 30%.
Purchase this tool from one of our authorized dealers:
| Max Pumping Capacity | 875 gpm |
| Max GPH | 52500 |
| Max TDH | 45 ft |
| Pump Type | Trash/Sludge/Slurry/Water |
| Max Solids | 4″ |
| Volute Material | Stainless Steel |
| Impeller Material | Stainless Steel |
| Discharge | 4″ Cam Loc |
| Weight | 59 lbs |
| LxWxH | 19″ x 15″ x 19″ |
| Hydraulic Flow | 7-11 gpm |
| Max Pressure | 2000 psi |
The stainless steel body and impeller are very durable and capable of moving liquids containing up to 30% solids. If you are pumping oily sludge, septic systems, muddy trenches or even clean water this is a pump for you. The 80TPS trash pump comes with a male 8” Camlock and a female Camlock adapter for an 8″ hose.
Purchase this tool from one of our authorized dealers:
| Max Pumping Capacity | 2700 gpm |
| Max GPH | 126000 |
| Max TDH | 33 ft |
| Pump Type | Trash/Sludge/Slurry/Water |
| Max Solids | 8″ |
| Volute Material | Stainless Steel |
| Impeller Material | Stainless Steel |
| Discharge | 8″ Cam Loc |
| Weight | 65 lbs |
| LxWxH | 16″ x 12″ x 23″ |
| Hydraulic Flow | 19-23 gpm |
| Max Pressure | 2500 psi |
WARRANTY
All Joint Zone products and their associated parts are warranted against defects in material and workmanship for a period of twelve months from the date of purchase. Repair or replacement of defective parts will be approved and determined solely by the manufacturer. This warranty does not cover part failure due to normal wear or tool abuse. This warranty becomes void if maximum pressures and/or flows are exceeded, or guidelines or operating instructions are not followed.
