Underwater Lift Bags

All Joint Zone flotation bags are developed in accordance with IMCA D-016 standards.

FEATURES:

• Due to the polyester fabric and its EVA/PVC copolymer coating, the material is very flexible and very easy to repair (with glue or a hairdryer with hot air)
• Joint Zone flotation bags are made of a very strong coated polyester fabric with a tensile strength of no less than 8,000 N/5 cm
• Due to the high-strength polyester fabric type IV, the material with which the flotation bags are made has a puncture resistance of no less than 2,150 N (in contrast to many competing products that only reach 1,750 N)
• Joint Zone flotation bags have no sharp corners (they are rounded off and smooth), which makes these flotation bags more robust and less likely to be damaged
• Joint Zone flotation bags are lightweight! Up to 50% lighter than the competition’s enclosed flotation bags, while the lift capacity is at least 10% higher
• The enclosed flotation bags require little maintenance and are very easy to clean

TOP-QUALITY MATERIALS:

• EVA/PVC copolymer coated polyester fabric – high-strength and heavy-duty
• Fabric’s tensile strength: 8,000 N/5 cm
• Puncture resistance: 2,150 N (in contrast to competitor’s products, which often do not reach more than 1,750 N)
• Resistant to many chemicals
• High UV-resistance
• Very easy to repair (with glue or a hairdryer with hot air), unlike materials coated with PU or TPU
• Highly flexible and lightweight material
• Equipped with a ¾” stainless steel ball valve
• Equipped with pressure relief valves

AUTHORIZED LIFT BAG DEALERS:

Amron International

Rental Tools Online

Convertible Lift Bags

Convertible lift bags have the ability to be used as an enclosed lift bag OR an open bottom lift bag. You no longer have to choose between the two. A removable cap, or multiple caps depending on size, have been manufactured into the bottom of the bag. with the cap(s) in place the bag can be used as an enclosed lift bag. Simply remove the cap(s) and you have an open bottom bag!

MARINE SALVAGE PILLOWS

Model	Lift Capacity	Height	Length	Weight	Rigging Points
MSP-200	247 lbs	38″	31″	10 lbs	1 Bottom
MSP-600	605 lbs	40″	48″	13 lbs	2 Top / 1 Bottom
MSP-1200	1210 lbs	51″	61″	19 lbs	2 Top / 1 Bottom
MSP-2400	2420 lbs	64″	77″	28 lbs	2 Top / 1 Bottom
MSP-4800	4840 lbs	78″	99″	42 lbs	2 Top / 1 Bottom
MSP-7200	7260 lbs	90″	113″	54 lbs	3 Top / 1 Bottom

PONTOON STYLE

Model	Lift Capacity	Diameter	Length	Weight	Rigging Points
PO-1100	1100 lbs	28″	79″	29 lbs	2
PO-2200	2200 lbs	35″	87″	48 lbs	2
PO-4400	4400 lbs	47″	94″	76 lbs	2
PO-6600	6600 lbs	55″	98″	92 lbs	2
PO-12000	12200 lbs	79″	110″	133 lbs	2
PO-22000	22000 lbs	79″	157″	181 lbs	2
PO-44000	44000 lbs	98″	193″	381 lbs	4

WARRANTY

All Joint Zone products and their associated parts are warranted against defects in material and workmanship for a period of twelve months from the date of purchase. Repair or replacement of defective parts will be approved and determined solely by the manufacturer. This warranty does not cover part failure due to normal wear or tool abuse. This warranty becomes void if maximum pressures and/or flows are exceeded, or guidelines or operating instructions are not followed.